ข้ามไปยังเนื้อหาหลัก
กลับไปโปรไฟล์ผู้เชี่ยวชาญ

รศ.ดร.กุลภา โสรัตน์

ผลงานตีพิมพ์ทั้งหมด

36 public publications

Page size102550

Leveraging naturally low pH for enhanced 2,4-dichlorophenoxyacetic acid removal from industrial wastewater: Carbon black adsorption and resource recovery approach

Noppaluck Promjan, Kullapa Soratana, Tanapon Phenrat

Journal of Water Process Engineering · 2025

Environmental Performance Measuring

Kullapa Soratana

Springer eBooks · 2025

Environmental Factors in ESG Investing

Kullapa Soratana

Springer eBooks · 2025

Environmental, Social, and Governance (ESG) Investment and Reporting

Michaela Bednárová, Kullapa Soratana

Springer eBooks · 2025

การพัฒนาเกณฑ์ปริมาณขยะเพื่อการท่องเที่ยวแบบกางเต็นท์สีเขียว

Priyanuch Mekchay, Kullapa Soratana

Journal of Logistics and Digital Supply Chain · 2023

The development of a waste baseline for sustainable camping practices is consistent with the growing eco-tourism movement which emphasizes environmental responsibility. A life cycle assessment (LCA) was conducted to determine the amount of waste produced by various camping tourism activities, including campgrounds, toilet/shower areas, washing areas, and kitchen/cooking areas. Data was collected from four camping sites in the Doi Chang Area of Chiang Rai province during peak season. On average, 1.25 kg of waste was generated per person from camping tourism. Recyclable waste made up the largest proportion of waste, weighing 0.58 kg per person, of which 77% coming from glass bottles. Other types of waste included 0.76 kg of general waste per person, 0.20 kg of organic waste per person, and 0.01 kg of hazardous waste per person. Waste management of entrepreneurs with the minimum quantity of wastes can be set as a waste minimization practice for others. Furthermore, the waste data, in conjunction with the range of waste produced, can be used in decision-making and to involve stakeholders in the establishment of waste criteria for sustainable camping.

Implication of Lean Philosophy in Higher Education Institutions - The Case of Islamia University of Bahawalpur

Muhammad Shafiq, Sonia Nazeer, Kullapa Soratana, Aleena Maqbool

SSRN Electronic Journal · 2023

Potential use of engineered nanoparticles in ocean fertilization for large-scale atmospheric carbon dioxide removal

Peyman Babakhani, Tanapon Phenrat, Mohammed Baalousha, Kullapa Soratana, Caroline L. Peacock, Benjamin S. Twining, Michael F. Hochella

Nature Nanotechnology · 2022

Abstract Artificial ocean fertilization (AOF) aims to safely stimulate phytoplankton growth in the ocean and enhance carbon sequestration. AOF carbon sequestration efficiency appears lower than natural ocean fertilization processes due mainly to the low bioavailability of added nutrients, along with low export rates of AOF-produced biomass to the deep ocean. Here we explore the potential application of engineered nanoparticles (ENPs) to overcome these issues. Data from 123 studies show that some ENPs may enhance phytoplankton growth at concentrations below those likely to be toxic in marine ecosystems. ENPs may also increase bloom lifetime, boost phytoplankton aggregation and carbon export, and address secondary limiting factors in AOF. Life-cycle assessment and cost analyses suggest that net CO 2 capture is possible for iron, SiO 2 and Al 2 O 3 ENPs with costs of 2–5 times that of conventional AOF, whereas boosting AOF efficiency by ENPs should substantially enhance net CO 2 capture and reduce these costs. Therefore, ENP-based AOF can be an important component of the mitigation strategy to limit global warming.

Technological and policy innovations toward cleaner development

Tanapon Phenrat, Kullapa Soratana, Prof Vikas Kumar, Sushil Raj Kanel, Amy E. Landis

Clean Technologies and Environmental Policy · 2022

Road connectivity of tourist destinations and activities of Chondaen District to promote sustainable tourism in Petchabun

Benjawan Chomborisut, เบญจวรรณ ชมบริสุทธิ์, Kullapa Soratana, กุลภา โสรัตน์

2021

Nitrous oxide emissions, N uptake, biomass, and rubber yield in N-fertilized, surface-irrigated guayule

K. F. Bronson, Douglas J. Hunsaker, Diaa M El-Shikha, Sharette M. Rockholt, Clinton F. Williams, Daina Rasutis, Kullapa Soratana, Rodney T. Venterea

Industrial Crops and Products · 2021

Incorporation of Environmental Criteria in the Tendering Process: Moving Towards Green Public Procurement in Bhutan

Tshering Choden, Kullapa Soratana, กุลภา โสรัตน์

2021

Incorporation of Environmental Criteria in the Tendering Process in Bhutan

Tshering Choden, Kullapa Soratana

Solid State Technology · 2021

Green Public Procurement (GPP) is considered an important tool to improve environmental performance, reduce the consumption of natural resources, and motivate markets towards the green product with innovation. The study aims to develop environmental criteria of office supplies that can be mentioned in the tendering process for the Royal Government of Bhutan (RGoB). The main objectives of the current study are to identify and prioritize environmental criteria primarily for office supplies. A comprehensive literature review was conducted to identify the best-practiced environmental criteria. The Analytic Hierarchy Process (AHP) was adopted to prioritize the environmental criteria that can be adopted in the procurement of goods. Four experts to weigh the importance of criteria performed the pairwise comparison. The result asserted that “use of recycled materials” with 12% of importance was the most important criteria among others, while “spare parts and repair services” (1.94% of importance) was considered as the least important criteria. This study is expected to ensure maximum environmental and financial benefits to the government as the RGoB spent approximately 60-70% of its annual budget on procurement of goods, services and works alone.

Lean readiness assessment model – a tool for Humanitarian Organizations' social and economic sustainability

Muhammad Shafiq, Kullapa Soratana

Journal of Humanitarian Logistics and Supply Chain Management · 2020

Purpose purpose of this study is to present a Lean Readiness Assessment Model (LRAM) for assessing the readiness of Humanitarian Organizations (HO) for adopting Lean Management (LM) (Johanson et al.) practices. Literature reveals that implementation of LM itself is a cost and most organizations have failed to adopt LM techniques due to a non-readiness status and a non-supportive organizational culture. This situation indicates that the assessment of organizations' readiness before implementation of lean techniques is necessary. Design/methodology/approach This was an empirical quantitative study. Based on a synthesis of the literature, a conceptual model was developed by identifying seven critical success factors (CSFs). The CSFs were validated by HO professionals via a questionnaire-based survey. The data from the responses were analysed by applying partial least square structured equation modelling (PLS-SEM) using the SmartPLS3 software. Findings A proven LRAM was constructed that consists of CSFs (independent and mediating variables), which have reflected positive coefficients and significant t >1.96 and p < 0.05 values. The CSFs that are significant include process management, planning and control management, customer relationship management, human resource management, communication and coordination management and a positive organizational culture. The CSFs of supplier relationship and top management and leadership had insignificant t and p values and were dropped from the final LRAM. Originality/value This is a unique and rare study in its nature which developed LRAM for HO sector. The contribution of this model is to improve the efficiency and sustainability (economic and social aspects) of an HO under scarce resource conditions.

A Knowledge Supply Chain for the ICT-Enhanced Tourism Education

Kullapa Soratana, Amy E. Landis, Jing Fu, Hidetsugu Suto

SpringerBriefs in environmental science · 2020

Improvement of Tourists’ Experience to Promote Sustainable Tourism

Kullapa Soratana, Amy E. Landis, Jing Fu, Hidetsugu Suto

SpringerBriefs in environmental science · 2020

Sustainable Development of Tourism

Kullapa Soratana, Amy E. Landis, Jing Fu, Hidetsugu Suto

SpringerBriefs in environmental science · 2020

Supply Chain Management of Tourism Towards Sustainability

Kullapa Soratana, Amy E. Landis, Jing Fu, Hidetsugu Suto

SpringerBriefs in environmental science · 2020

The Role of Life Cycle Approaches in Sustainable Development of Tourism

Kullapa Soratana, Amy E. Landis, Jing Fu, Hidetsugu Suto

SpringerBriefs in environmental science · 2020

Life Cycle Assessment and Supply Chain Management for Tourism Enterprises

Kullapa Soratana, Amy E. Landis, Jing Fu, Hidetsugu Suto

SpringerBriefs in environmental science · 2020

Acid-Assisted Recycling of Iron Hydroxide Sludge as a Coagulant for Metalworking Fluid Wastewater Treatment

Phimonphan Mooheng, Kullapa Soratana, Tanapon Phenrat

Waste and Biomass Valorization · 2019

Sustainable Environmental Remediation Using NZVI by Managing Benefit-Risk Trade-Offs

Khara Grieger, Rune Hjorth, Alexis W. Carpenter, Frederick C. Klaessig, Emilie Lefèvre, Claudia K. Gunsch, Kullapa Soratana, Amy E. Landis, Fern Wickson, Danail Rumenov Hristozov, Igor Linkov

Springer eBooks · 2019

An Investigation of Challenges in Implementing Sustainable Supply Chain Management for Construction Industry in Thailand by Interpretive Structural Model Approach

Shaolan Zou, Kullapa Soratana

World Academy of Science, Engineering and Technology, International Journal of Industrial and Manufacturing Engineering · 2017

Guayule as an alternative source of natural rubber: A comparative life cycle assessment with Hevea and synthetic rubber

Kullapa Soratana, Daina Rasutis, Habib Azarabadi, Pragnya Eranki, Amy E. Landis

Journal of Cleaner Production · 2017

Life cycle assessment of sunflower cultivation on abandoned mine land for biodiesel production

Tyler M. Harris, Troy A. Hottle, Kullapa Soratana, Jonathan Klane, Amy E. Landis

Journal of Cleaner Production · 2015

Biofuels via Fast Pyrolysis of Perennial Grasses: A Life Cycle Evaluation of Energy Consumption and Greenhouse Gas Emissions

George G. Zaimes, Kullapa Soratana, Cheyenne L. Harden, Amy E. Landis, Vikas Khanna

Environmental Science & Technology · 2015

A well-to-wheel (WTW) life cycle assessment (LCA) model is developed to evaluate the environmental profile of producing liquid transportation fuels via fast pyrolysis of perennial grasses: switchgrass and miscanthus. The framework established in this study consists of (1) an agricultural model used to determine biomass growth rates, agrochemical application rates, and other key parameters in the production of miscanthus and switchgrass biofeedstock; (2) an ASPEN model utilized to simulate thermochemical conversion via fast pyrolysis and catalytic upgrading of bio-oil to renewable transportation fuel. Monte Carlo analysis is performed to determine statistical bounds for key sustainability and performance measures including life cycle greenhouse gas (GHG) emissions and Energy Return on Investment (EROI). The results of this work reveal that the EROI and GHG emissions (gCO2e/MJ-fuel) for fast pyrolysis derived fuels range from 1.52 to 2.56 and 22.5 to 61.0 respectively, over the host of scenarios evaluated. Further analysis reveals that the energetic performance and GHG reduction potential of fast pyrolysis-derived fuels are highly sensitive to the choice of coproduct scenario and LCA allocation scheme, and in select cases can change the life cycle carbon balance from meeting to exceeding the renewable fuel standard emissions reduction threshold for cellulosic biofuels.

A sustainability review of domestic rubber from the guayule plant

Daina Rasutis, Kullapa Soratana, Colleen Marie McMahan, Amy E. Landis

Industrial Crops and Products · 2015

Integrating Life Cycle Assessment with Green Building and Product Rating Systems: North American Perspective

William O. Collinge, Cassandra L. Thiel, Nicole A. Campion, Sami G. Al‐Ghamdi, C.L. Woloschin, Kullapa Soratana, Amy E. Landis, Melissa Marie Bilec

Procedia Engineering · 2015

The development of green building rating systems (GBRS) and sustainability metrics for buildings, including building products, is reviewed from a North American perspective. The Leadership in Energy and Environmental Design (LEED) system and the Living Building Challenge (LBC) are highlighted as primary examples of different levels of GBRS. Life cycle assessment (LCA) is introduced as a preferred method of quantifying sustainability, and its integration into current GBRS is examined a prominent building example. Two example applications of LCA to building products associated with GBRS – carpet and roof membranes – are provided. In the first example, conventional carpet was compared with carpet meeting the standards of the LBC's materials exclusion criteria (Red List, via the Declare product labeling system). In the second example, LCA was applied to both the manufacture and use phases of roof membrane alternatives for a building retrofit project, one of which would have aided in achieving LEED certification. The Declare-listed products did not perform better in every LCA impact category, and the GBRS-preferred roof system performed more poorly in all LCA impact categories, while suggesting the need for additional LCA categories. Both examples help to illustrate the complexity and tradeoffs encountered while integrating the quantitative perspective of LCA and the qualitative perspective of GBRS.

The role of sustainability and life cycle thinking in U.S. biofuels policies

Kullapa Soratana, Cheyenne L. Harden, George G. Zaimes, Daina Rasutis, Claire Dancz, Vikas Khanna, Amy E. Landis

Energy Policy · 2014

Effects of co-products on the life-cycle impacts of microalgal biodiesel

Kullapa Soratana, William J. Barr, Amy E. Landis

Bioresource Technology · 2014

Re-envisioning the renewable fuel standard to minimize unintended consequences: A comparison of microalgal diesel with other biodiesels

Kullapa Soratana, Vikas Khanna, Amy E. Landis

Applied Energy · 2013

A Life Cycle Assessment Based Evaluation of a Coupled Wastewater Treatment and Biofuel Production Paradigm

Monica Christine Rothermel, Amy E. Landis, William J. Barr, Kullapa Soratana, Kayla M. Reddington, Matthew K. Weschler, Grace Witter, Willie F. Harper

Journal of Environmental Protection · 2013

A laboratory experiment was performed to determine the feasibility of coupling a conventional wastewater treatment system with an algal photobioreactor (PBR) for the removal of nutrients from wastewater and production of renewable resources. An activated sludge batch reactor was set up in series with an algal PBR to feed synthetic wastewater to Chlorella vulgaris. The nutrient concentration in the water as well as lipid content, carbohydrate content, and growth rate of the algal biomass were tested over 10 cycles to determine the capabilities of the coupled system. The study revealed complete nutrient removal in some cycles, with the average final nutrient content of 2 mg-P/L and 3 mg-N/L in effluent of the PBR. The algae biomass contained 24% ± 3% lipids and 26% ± 7% carbohydrates by dry weight. A life cycle assessment revealed the highest energy demand occurred during harvesting of the algal mixture through centrifugation or filtration, but the highest global warming and eutrophication impacts were due to CO2 use and PBR construction material production. It is feasible for the system to treat wastewater while generating renewable resources, but the system must be optimized to reduce life cycle environmental impacts and result in a net energy gain before large-scale implementation is possible.

Life Cycle Assessment of Microalgal Biodiesel and Policy Implications to Minimize Unintended Consequences

Kullapa Soratana

D-Scholarship@Pitt (University of Pittsburgh) · 2012

The overall goals of this research are to identify forms of environmentally friendly microalgal biodiesel production and to address the broader policy implications of the Renewable Fuel Standard 2 (RFS2) to avoid unintended environmental consequences from the production and the utilization of biofuels. Life cycle assessment (LCA) of microalgal biodiesel was conducted using a process LCA model with Monte Carlo Analysis (MCA) for uncertainty analysis. First, the study focused on environmental impacts from the production of microalgal mass. Twenty scenarios of microalgal cultivation with different sources of CO2, nutrients and material used to construct photobioreactor (PBR) were evaluated. The results showed that the utilization of CO2 from flue gas only reduces global warming potential (GWP), while the utilization of nutrients from municipal wastewater mainly reduces eutrophication potential (EP), and the selection of material used to construct PBR is important. LCA of microalgal biodiesel was conducted to evaluate the major contributions to different environmental impacts and to identify the production condition with minimal impacts. Environmental impacts from four different microalgal biodiesel production scenarios to achieve the biomass-based diesel quantity required by the RFS2 were quantified. These four scenarios included lower and higher production efficiencies and different sources of resources, which are synthetic, and natural and waste. None of the four scenarios met the RFS’s greenhouse gas emissions requirement. The emissions can be minimized by improving the energy efficiency of harvesting process, since the GWP results are sensitive to energy consumption in harvesting process. Sensitivity of EP, ozone depletion potential and ecotoxicity potential to other parameters are also reported. GWP, EP and photochemical smog formation potential (PSP) results from the scenario with minimal impacts were compared to the impacts from other diesels, petroleum diesel, soybean diesel and canola diesel. The tradeoffs between different types of diesel suggested that future RFS should include other environmental criteria such as EP and PSP to minimize unintended consequences. Possible strategies to setting life-cycle EP and PSP criteria are discussed. Finally, a LCA on the co-production of microalgal biodiesel and bioethanol from microalgae and corn were conducted. CO2 for microalgal cultivation was provided from flue gas and/or fermentation processes. The recovery of CO2 from fermentation process decreases GWP, but slightly increases EP. The co-production of the microalgal biofuels can reduce GWP and EP by 54 and 52%, respectively, compared to the production of microalgal biodiesel alone. Lipid and carbohydrate contents of microalgae should be 24-36% and 44%, respectively, in order to produce the maximum energy content in algal biofuels with the minimum GWP and EP impacts.

Microalgal biodiesel and the Renewable Fuel Standard's greenhouse gas requirement

Kullapa Soratana, Willie F. Harper, Amy E. Landis

Energy Policy · 2012

Evaluating industrial symbiosis and algae cultivation from a life cycle perspective

Kullapa Soratana, Amy E. Landis

Bioresource Technology · 2011

Increasing innovation in home energy efficiency: Monte Carlo simulation of potential improvements

Kullapa Soratana, Joe Marriott

Energy and Buildings · 2009

Performance characterization of biological wastewater treatment systems using 5-day biodegradable dissolved organic carbon and ultraviolet absorbance at 254 nanometers

Kullapa Soratana, Eakalak Khan, Sutha Khaodhiar

2004

Biodegradable dissolved organic carbon (BDOC) and ultraviolet absorbance at 254 nm (UV254) which have been widely used in the drinking water field were investigated for their applicabilities to be used as wastewater quality parameters and treatment efficiency indicators. Three bench-scale biological wastewater treatment processes, activated sludge (AS), trickling filter (TF) and rotating biological contactor (RBC), were fed with primary wastewater from fullscale municipal wastewater treatment plants. First, relatively low organic concentration primary wastewater was used as an influent for TF and RBC that were operated at three different hydraulic loading rates (HLR). The results indicated that effluent BDOC5 and its removal of TF and RBC were not much different across different HLRs but the trends were reasonable. The UV254 reslts indicated that TF and RBC removed minimal amount of UV absorbing constituents. When applying higher organic concentration primary treated wastewater fromanother treatment plant as an influent tothe three biological wastewater treatment systems, AS system was operated at five different solid retention times (SRT), while TF and RBC were operated at four different HLRs. For AS, higher SRTs slightly increased BDOC5 removal but has no effect on UV254 removal. For TF and RBC, the effluent BDOC5 and their removal results were very similar; the values increased with higher HLRs. The UV254 results showed that TF barely removed UV254 absorbing constituents. The applicabilities of BDOC5 and UV254 were supported by a fairly strong linear relationship between BDOC5 and UV254. BDOC5 can be used as an indicator of secondary wastewater quality and treatment process performance, while UV254 can be used only for characterizing quality of wastewater.

Page 1 of 1

PreviousNext

การใช้คุกกี้วิเคราะห์

เว็บไซต์นี้ใช้ Google Analytics เพื่อดูภาพรวมการใช้งาน เช่น จำนวนผู้เข้าชมและหน้าที่ได้รับความสนใจ โดยจะเปิดใช้เมื่อคุณยอมรับเท่านั้น

ยังไม่ได้เลือก